Study of Capacitor Coupled Substation with Controllable Network Transformer for Power Tapping and Control

Volume 9, Issue 1, February 2024     |     PP. 11-26      |     PDF (1888 K)    |     Pub. Date: June 27, 2024
DOI: 10.54647/dee470359    36 Downloads     3489 Views  

Author(s)

Sinqobile Wiseman Nene, Department of Electrical Engineering Department, Tshwane University of Technology, EMalahleni, Republic of South Africa

Abstract
Electricity is indispensable worldwide, but conventional distribution networks struggle in sparsely populated areas. Capacitor Coupled Substations (CCS) and Controllable Network Transformers (CNT) are promising solutions for supplying electricity to such regions. CCS efficiently delivers power to remote areas, while CNT enables bidirectional power flow, crucial for integrating micro-grids and managing energy fluctuations. Combining CCS and CNT facilitates both power tapping and injection into the transmission network. A study using MATLAB/Simulink models the impact of CCS-CNT integration on transmission networks. Results indicate negligible voltage level disturbance, suggesting its seamless integration. Moreover, incorporating CNT within CCS systems might obviate the need for external ferroresonance suppression circuits (FSC). Thus, CCS-CNT systems offer dual functionality, effectively supplying and injecting electricity into the grid while potentially serving as FSCs. The research purpose is to assess the results that can be achieved when utilizing a CCS-CNT system for supplying electricity to a dedicated load. The results showed that a typical CCS-CNT results in normally acceptable output voltage when the system is connected to a transmission network. Furthermore, it also shows that there is no impact on the transmission network it is connected to. This research underscores the importance of innovative solutions like CCS-CNT in extending reliable electricity access to underserved areas and enhancing grid resilience. Further analysis is warranted to explore additional benefits and optimize system performance.

Keywords
Capacitor Coupled Substation; Controllable Network Transformer; System Modeling; Electrical Transmission Network; Rural Electrification Technology; Alternative Distribution Network

Cite this paper
Sinqobile Wiseman Nene, Study of Capacitor Coupled Substation with Controllable Network Transformer for Power Tapping and Control , SCIREA Journal of Electrical Engineering. Volume 9, Issue 1, February 2024 | PP. 11-26. 10.54647/dee470359

References

[ 1 ] Alimuddin, A. Mukrod, I. Saraswati, H. Haryanto, R. Arafiyah and C. A. Wicaksana, “Study of Electrical Power System on Transmission and Distribution in PT Krakatau Daya Listrik,” in 2022 International Conference on Informatics Electrical and Electronics (ICIEE), Yogyakarta, 2022.
[ 2 ] R. Ufa, Y. Malkova, V. Rudnik, M. Andreev and V. Borisov, “A review on distributed generation impacts on electric power system,” International Journal of Hydrogen Energy, vol. 47, no. 47, pp. 20347-20361, 2022.
[ 3 ] H. W. Pandey, R. Kumar and R. K. Mandal, “Transformation of Indian Distribution Sector: Opportunity and Challenges for Unlocking the Demand Response Potential,” Renewable Energy Focus, vol. 42, pp. 221-235, 2022.
[ 4 ] Q. Wen, G. Liu, Z. Rao and S. Liao, “Applications, evaluations and supportive strategies of distributed energy systems: A review,” Energy and Buildings, vol. 225, p. 110314, 2020.
[ 5 ] S. R. Khuntia, J. L. Rueda, S. Bouwman and M. A. M. M. v. d. Meijden, “A literature survey on asset management in electrical power [transmission and distribution] system,” International Transactions on Electrical Energy Systems, vol. 26, no. 10, pp. 2123-2133, 2016.
[ 6 ] J. Lassila, J. Haapaniemi, J. Haakana, J. Partanen and J. Pylvänäinen, “VALUE OF CUSTOMER FLEXIBILITY REGARDING RELIABILITY OF SUPPLY IN THE RURAL AREA ELECTRICITY DISTRIBUTION,” in CIRED 2021 - The 26th International Conference and Exhibition on Electricity Distribution, Online Conference, 2021.
[ 7 ] R. Rojas, J. Chaves and M. Tavares, “Ferroresonance mitigation for the unconventional rural electrification system,” Electric Power Systems Research, vol. 223, p. 109590, 2023.
[ 8 ] A. S. Duran and F. G. Sahinyazan, “An analysis of renewable mini-grid projects for rural electrification,” Socio-Economic Planning Sciences, vol. 77, p. 100999, 2021.
[ 9 ] A. S. Duran and F. G. Sahinyazan, “An analysis of renewable mini-grid projects for rural electrification,” Socio-Economic Planning Sciences, vol. 77, p. 100999, 2021.
[ 10 ] M. M. Khan, Imdadullah, J. Nebhen and H. Rahman, “Research on Variable Frequency Transformer: A Smart Power Transmission Technology,” IEEE Access , vol. 9, pp. 105588 - 105605, 2021.
[ 11 ] D. Divan and J. Sastry, “Controllable Network Transformers,” in 2008 IEEE Power Electronics Specialists COnference, Rhodes, 2008.
[ 12 ] D. Das, D. M. Divan and R. G. Harley, “Power Flow Control in Networks Using Controllable Network Transformers,” IEEE Transactions on Power Electronics, vol. 25, no. 7, pp. 1753-1760, 2010.
[ 13 ] D. Das, D. Divan and R. G. Harley, “Implementation of loadflow for networks with controllable network transformers,” in 2013 North American Power Symposium (NAPS), Manhattan, 2013.
[ 14 ] H. Chan, A. R. Iyer, R. G. Harley and D. Divan, “Dynamic Grid Power Routing Using Controllable Network Transformers (CNTs) With Decoupled Closed-Loop Controller,” IEEE Transactions on Industry Applications, vol. 51, no. 3, pp. 2361-2372, 2015.
[ 15 ] Y. Liu, W. Shi, J. Hu, Y. Zhao and P. Wang, “Online Capacitor Voltage Transformer Measurement Error State Evaluation Method Based on In-Phase Relationship and Abnormal Point Detection,” Smart Grid and Renewable Energy, vol. 15, no. 1, pp. 34-48, 2024.
[ 16 ] F. Aminifar, M. Abedini, T. Amraee, P. Jafarian, M. H. Samimi and M. Shahidehpour, “A review of power system protection and asset management with machine learning techniques,” Energy Systems , vol. 12, p. 855–892, 2022.
[ 17 ] N. C, H. S and I. M.K, “Modelling of Automated Controllable Network Transformer,” International Journal of COmputational Engineering Research, vol. 03, no. 6, pp. 28-33, 2013.
[ 18 ] M. J. Saulo, C. T. Gaunt and M. S. Mbogho, “Penetration level of Capacitor Coupling Sub-station on a power transmission network,” in 47th International Universities Power Engineering Conference (UPEC), Uxbridge, 2012.
[ 19 ] “The Impact of Capacitor Coupled Sub-Station in Rural Electrification of Sub-Saharan Africa,” International Journal of Energy and Power Engineering , vol. 4, no. 2-1, pp. 12-29, 2014.
[ 20 ] M. J. Mauger, P. Kandula, F. Lambert and D. Divan, “Grounded Controllable Network Transformer for Cost-Effective Grid Control,” in 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, 2018.
[ 21 ] M. A. Basit, S. Dilshad, R. B. and S. M. S. u. Rehman, “Limitations, challenges, and solution approaches in grid-connected renewable energy systems,” International Journal of Energy Research, vol. 44, no. 6, pp. 4132-4162, 2020.
[ 22 ] M. H. Saeed, W. Fangzong, B. A. Kalwar and S. Iqbal, “A Review on Microgrids’ Challenges & Perspectives,” IEEE Access, vol. 9, pp. 166502 - 166517, 2021.
[ 23 ] H. Chen, A. R. Iyer, R. G. Harley and D. Divan, “Dynamic Grid Power Routing Using Controllable Network Transformers (CNTs) With Decoupled Closed-Loop Controller,” IEEE Transactions on Industry Applications, vol. 51, no. 3, pp. 2361-2372, 2015.
[ 24 ] A. R. Iyer, P. R. Kandula, R. Moghe, F. C. Lambert and D. M. Divan, “Scaling the controllable network transformer (CNT) to utility-level voltages with direct AC/AC power electronic building blocks (PEBBs),” in 2013 IEEE Energy Conversion Congress and Exposition, Denver, 2013.
[ 25 ] Imdadullah, S. M. Amrr, M. J. Asghar, I. Ashraf and M. Meraj, “A Comprehensive Review of Power Flow Controllers in Interconnected Power System Networks,” IEEE Access, vol. 8, pp. 18036-18063, 2020.
[ 26 ] C. P. Steinmetz, “Power Control and Stability of Electric Generating Stations,” in 56th Annual Convention of the American Institute of Electrical Engineers, White Sulphur Springs, 1920.